How to avoid overload operation of filter press equipment

When it comes to the filter press, it is easy to think of the hydraulic system of the filter press. It provides powerful power for the whole operation of the equipment, including squeezing the filter plate, pulling the push plate backward and driving the push plate trolley. This is achieved by relying on the hydraulic system of the equipment to increase strong power. Therefore, during the use of filter press equipment, it is the hydraulic system of the equipment that is frequent and firm.

Filter press equipment is like a person, who can also "get sick". The same person has the best working conditions, and the same emotion. In all similarities, work fatigue is a common problem for our personnel and equipment. When the equipment is overworked, it will seriously affect the working efficiency and service life of the equipment.

When the hydraulic system is in the filtering state, it will tell us in several forms: first, the temperature of the whole part of the hydraulic system is very high; Second: the hydraulic system is weak.

As for the reason of this performance, we only need to take some measures for the liquid system at this time. Inject more hydraulic oil or replace hydraulic oil to reduce the temperature of hydraulic oil under high temperature, but do not gradually reduce the temperature of the whole system; When the hydraulic oil temperature drops, the temperature of the piston sealing ring in the hydraulic device returns to normal, which can restore its sealing effect and prevent the piston from weakening due to oil leakage.

In addition, the Overwork of the filter press appears in the online circuit. When the circuit temperature is found to be too high, it indicates that the filter press equipment operates under overload, and the workload or pressure range of the equipment greatly exceeds the equipment. Within the bearing range, the engine that converts electric energy into power requires a larger circuit, and the natural circuit will overheat.

At this time, we can only stop the equipment and check the cause of equipment overload. It's best not to continue overloading. If it runs overloaded for a long time, it will have a great impact on the filter press equipment. It greatly affects the service life of the equipment. So as to bring some unnecessary losses to the enterprise.